Cleaning And Replacing The Filter - Anthem LTX-300 Instruction Manual

Cleaning and Replacing the Filter

Clean the fi lter regularly or air intake effi ciency may deteriorate and malfunction may occur.
1
Remove the inner fi lter
Lift up while pushing the claw
2
Clean the fi lter
●
Wash the fi lter with water and dry it in a shaded area.
●
In extremely soiled cases, using a neutral detergent is recommended.
Put on rubber gloves when using a neutral detergent.
●
After washing the fi lter with water, make sure that it is completely dry
before reinstalling. Otherwise electric shock or malfunctions may occur.
●
Do not clean the fi lter with a vacuum cleaner or air duster. The fi lter is
soft and may be damaged.
3
Reinstall the inner fi lter
Check that the left
and right claws are
locked onto the unit
ENGLISH
CAUTION
●
Pull the power plug from the power
outlet.
MEMO
If the fi lter is damaged or too
dirty to be cleaned
●
Replace with a new fi lter. A dirty fi lter
will dirty the internal parts of the unit
and cause shadows on the video
image.
●
To purchase a new fi lter or when it
is dirty in the internal parts, consult
your authorized dealer.
■
Inner Filter Part No.:
Replacement Filter:
the appearance is black
PB006560999 (Inner Filter)
49