Table of Contents
Advertisement
Installation
Inserting / Changing the Batteries
Mounting holes
The Home Thermostat requires 2 x AA
batteries for operation. The battery
compartment can be accessed by
removing the backplate. To do this, the
two
screws
at
bottom
of
the
Thermostat need to be loosened. The
backplate can be gently pulled away
from the Thermostat body and slid
downwards until it comes free from
Backplate
the hooks at the top of the device.
Wall Mounting
The backplate is designed to be wall
mounted. This can be achieved by
inserting suitable screws through the
two mounting holes, or by using
adhesive pads (not included).
Battery compartment
Hide quick links:
Advertisement
Table of Contents
