Page 1
USER MANUAL Fixed Cellular Terminal S190TG...
Page 2
S190TG User Manual V1.0 Thank you for buying our products. To reduce the risk of fire, electric shock and/or personal injury, please read this manual before using this unit.
S190TG User Manual V1.0 Contents 1 BEFORE GETTING STARTED....Copyright notice ............6 Use and care.............. 7 Introduction ............... 8 2 PARTS CHECKING LIST ......3 FEATURES AND SPEC......Main Features............9 Physical & Environmental........10 4. SET UP AND INSTALLATION ....
Page 4
S190TG User Manual V1.0 LED/LCD Indications ..........12 5 SETTING AND PROGRAM OPERATION16 Setting mode introduces........17 Restore Default Setting ..........17 Control Caller ID Display........17 Hardware check ............18 Check the version of software.......18 Set Speaker Volume..........19 Set Microphone Gain Level........19 GSM Dialing Set (Convert Prefix number)....20 Call limit function............21...
1 Before Getting Started Copyright notice VOGTEC shall not be liable for any direct, indirect, consequential or incidental damages about the use of this equipment, manual or any related materials. The information in this technical manual is advisory in nature and is subject to change.
S190TG User Manual V1.0 employees and customers of Vogtec co., Ltd and may not be reproduced without prior written approval of vogtec co., ltd. Use and care To care for your product, please keep it away from: Liquids of any kind Don’t expose your product to water,...
Don’t drop your product. Introduction This manual is designed to familiarize you with your GSM router S190TG. To get maximum benefit from this product, we suggest that you read the instruction manual carefully. You are advised to keep the manual safely for reference in...
S190TG User Manual V1.0 You will find that the GSM Router is the most economical way to route your Mobile / Long distance calls through the GSM mobile, reducing your communication cost. We are sure you will be satisfied with its performance.
S190TG User Manual V1.0 Four band 850/900/1800/1900 MHz auto compatible. 12V DC operated (can be connected to a 7.5V truck battery). 48V line voltage (suitable for all types of PABX and billing machine). RJ-11 socket for easy interface with any kind of PABX system.
S190TG User Manual V1.0 4. Set up and Installation Inserting a SIM Card into the unit You may prepare your SIM card in a GSM phone prior to inserting it into the unit. Ensure that the SIM card PIN facility is disabled.
S190TG User Manual V1.0 appendix. Interface Description PHONE: Connect a Caller ID Telephone instrument to this connection. DC12V: Connect the power adapter output to this connection. ANT: Connect the antenna to this connection. LED/LCD Indications Insert the SIM card in the SIM card holder provided...
Page 13
S190TG User Manual V1.0 The signals of LEDS are as following: All LEDs This means that the UNIT is glow and initializing the software and login the roll then network flash the signal This means that the UNIT is working.
Page 14
S190TG User Manual V1.0 sent to the telephone instrument connected to the UNIT in form of digital code. While UNIT is connected to a phone the following error codes will be displayed on phone LCD: Code Explanation Solving method Cannot check...
Page 15
S190TG User Manual V1.0 can be obtained from the GSM service provider. Incorrect SIM Please check the SIM or can not and contact the GSM register in service provider. Please specified insert the SIM in any network normal mobile phone...
S190TG User Manual V1.0 NOTE: If the UNIT continues to mal-function contact our customer care centre to get on-line help. 5 Setting and Program Operation Setting mode introduces: 1. Only get in the setting mode can program the UNIT. 2. The get in the setting mode way: pick up the phone of the UNIT and then input code “**#”, then...
S190TG User Manual V1.0 will make “Bee” tone, if error it make “Di-Di-Di”. 6. in program mode. After input a program code, if you want to continue do program without exit to the standby mode. Then press “*#” can exit the program mode to setting mode.
S190TG User Manual V1.0 Deactivate Incoming Caller ID: **14#0# Default is DTMF caller ID display NOTE: If set **14#0# when the GSM number of UNIT has an incoming call, it will not display the caller ID. Hardware check Check IMEI Number...
S190TG User Manual V1.0 Set Speaker Volume This command can be used to change the speaker volume when talking. Program code: **11#LEVEL# LEVEL: integer value with specific range 0-100 Default: 90 Set Microphone Gain Level This command can be used to change the microphone gain level when talking.
S190TG User Manual V1.0 11 +16.5 dB 12 +18.0 dB 13 +19.5 dB 14 +21.0 dB 15 +22.5 dB Default: 3 GSM Dialing Set (Convert Prefix number) This Function can be used to convert the prefix numbers. Max is 50 sets for GSM line only.
S190TG User Manual V1.0 dialed by replacing the initial digits of the dialed number; this can be up to 8 digits. When you enter this digit as 0 then the prefix number will be deleted. Example: To convert the prefix number from 9522 to 022 : **22#9522*022#...
S190TG User Manual V1.0 Program code **42#0# to disable limit outgoing number function. Program code **42#1# to enable limit outgoing number function. Program code **43# the limit outgoing number# to set the “limit outgoing number” (10 numbers can be stored) Program code: **43#the limit outgoing number*# to delete this number from list.
S190TG User Manual V1.0 random code as new PIN code for this SIM card. Then this SIM card will be lock to UNIT after next restart the UNIT. The command code is **53#password A# Notice: the password A is created by user, when to disable SIM card lock need must use the same password.
S190TG User Manual V1.0 Disable network lock Disable network lock. The command code is **56#password C# Notice: the password C is setting by user self when he enables SIM card lock creates the password C. Enable network lock Setting UNIT work only with present SIM cards Network code.
S190TG User Manual V1.0 The command code is **59#password D# Notice: 1.The password D is created by user, when to disable SIM card lock need must use the same password. 2. The password A, B, C, D is 4 numbers, such as 3333 or 4567.
Page 26
S190TG User Manual V1.0 code and setting mode ◆ Restore default **00# setting ◆ Check the **01## version ◆ Check IMEI **06## number ◆Set speaker **11#Level# volume ◆Set microphone **12#0*Level# gain level ◆ **14#1# ◆ **14#2# DTMF DTMF ◆ Disable GSM...
Page 27
S190TG User Manual V1.0 ◆ **41#call Input the call number# number number ◆ Disable limit **42#0# outgoing number function Disable ◆ Enable limit **42#1# outgoing number function ◆ **43# the limit Set the limit outgoing outgoing number, it number# can store 10 groups ◆...
S190TG User Manual V1.0 before using the UNIT or in case of any wrong programming done by mistake. Please do not use any other power supply (adaptor), use only the power adaptor supplied with the UNIT. 7. Maintenance The device is an electronic product of high craftsmanship.
Page 30
S190TG User Manual V1.0 chemicals to clean it. To clean the device, wipe it with a soft anti-static cloth slightly dampened mild soap-and-water solution. Treat the device gently and avoid dropping, knocking or shaking it. =30=...