Additional Safety Rules - Makita 6040DW Instruction Manual

ADDITIONAL SAFETY RULES
FOR CHARGER AND TOOL
1. The Charger and the tool are specifically designed t o work together. Do not
attempt t o charge any other cordless tool with this Charger. Do not attempt
t o charge the tool with any other charger.
2. Do
not charge the tool when temperature is BELOW 10°C (5OoF)
or
ABOVE
45OC (113OF).
3. Do not use charger in damp or wet locations.
4. Do not attempt t o use a step-up transformer, an engine generator or DC pow-
5. Do not store the tool in locations where the temperature may reach or ex-
6. Do not incinerate the tool even if
it
is severely damaged or is completely worn
er receptacle.
ceed 5OoC (122OF).
out. The tool can explode
in
a fire.
ADDITIONAL SAFETY RULES
1. Be aware that this tool is always in an operating condition, because
it
does
2. Always be sure you have a firm footing.
3. Hold the tool firmly.
4.
Keep hands away from rotating parts.
5. When drilling into walls, floors or wherever "live" electrical wires may be
encountered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL!
Hold the tool only
by
the insulated grasping surfaces t o prevent electric shock
if you drill into a "live" wire.
not have t o be plugged into an electrical outlet.
Be sure no one is below when using the tool in high locations.
6.
Do not leave the tool running. Operate the tool only when hand-held.
7.
Do not touch the drill bit or the workpiece immediately after operation: they
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
5