MECHANICAL DISASSEMBLY
CAUTION: This LCD TV uses several different kinds of screws. Using the correct screw is necessary to
prevent damage. Lead wires must be redressed to their previous locations after servicing.
1. CABINET BACK REMOVAL
Remove 7 screws (3X10), 1 screw (3X6), and 2 screws (4X10)
Grasp the bottom of the back and tilt forward to release the hooks.
Remove the cabinet back.
2. STAND REMOVAL
Note: Position TV face down on a padded or cushioned
surface to protect the screen and finish.
Remove 2 screws (3X25) to take the stand off.
2 screws (3X25)
– 6 –