BMW 2 SERIES Owner's Manual page 56

Controls
fixing points on the opposite side of the ve‐
hicle.
3. Press the wind deflector inwardly and up,
arrow 1, to the extent that the wind deflec‐
tor can be positioned in front of the fixing
points on the installation side.
Press the wind deflector downward, while
inserting the pins in the corresponding fix‐
ing points, arrows 2.
4. To ensure safe latching, press the wind de‐
flector downward in the middle, arrows 1.
Grasp the inner framework of the wind de‐
flector on the recessed grip and fold it up,
arrow 2.
52
Opening and closing
I n f o r ma t i o n P r o v i d e d b y :
Online Edition for Part no. 01 40 2 959 847 - II/15
Do not tilt the front seat backrest too far
back
Do not tilt the front seat backrest too far back
with the wind deflector installed if the seat is to
be moved all the way back. Otherwise, the
wind deflector will be damaged.◀
Removing
Proceed in reverse sequence.
Luggage on the back seat
In order to store luggage on the rear seat when
the wind deflector is installed, the outer frame
of the wind deflector is flipped up.
In this wind deflector position, the rear seat
backrest can be folded down, e.g. to protect
the upholstery against damage caused by
pieces of luggage.
1. Turn the release lever 90°, arrow 1, and
fold the outer frame forward, arrow 2.
2. Place luggage on the rear seat. Make sure
that the luggage does not project past the
fixing points for the wind deflector.