Auto Correction Of Brightness And Contrast (Auto Lighting Optimizer) - Canon EOS 750D Instruction Manual

Auto Correction of Brightness and ContrastK
3
If the image comes out dark or the contrast is low, the brightness and
contrast can be corrected automatically. This function is called Auto
Lighting Optimizer. The default setting is [Standard]. With JPEG
images, the correction is applied when the image is captured.
In Basic Zone modes, [Standard] is set automatically.
Under [54: Custom Functions (C.Fn)], if [3: Highlight tone priority] is
set to [1: Enable], [Auto Lighting Optimizer] will be set automatically to
[Disable].
If a setting other than [Disable] is set and you use exposure
compensation or flash exposure compensation to darken the exposure,
the image may still come out bright. If you want a darker exposure, set
this function to [Disable].
Depending on the shooting conditions, noise may increase.
In step 2, if you press the <B> button and uncheck
during man expo] setting, the Auto Lighting Optimizer can also be set in
the <a> mode.
136
Select [Auto Lighting Optimizer].
1
Under the [z2] tab, select [Auto
Lighting Optimizer], then press
<0>.
Select the setting.
2
Select the desired setting, then press
<0>.
Take the picture.
3
The image will be recorded with the
brightness and contrast corrected if
necessary.
[ ]
X
the [Disable