1. Manuals
  2. Brands
  3. Bematech Manuals
  4. Desktop
  5. LC7100
  6. Manual

Bematech LC7100 Manual

Smart pc
Hide thumbs Also See for LC7100:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
LC7100 Smart PC

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LC7100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Bematech LC7100

Summary of Contents for Bematech LC7100

  • Page 1 LC7100 Smart PC...
  • Page 2 Copyright 2012 All Rights Reserved Manual Version 1.0 Part Number: The information contained in this document is subject to change without notice. We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.

  • Page 3: Important Safety Instructions

    Safety IMPORTANT SAFETY INSTRUCTIONS To disconnect the machine from the electrical Power Supply, turn off the power switch and remove the power cord plug from the wall socket. The wall socket must be easily accessible and in close proximity to the machine.

  • Page 4: Caution On Lithium Batteries

    CAUTION ON LITHIUM BATTERIES There is a danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. Battery Caution Risk of explosion if battery is replaced by an incorrectly type. Dispose of used battery according to the local disposal instructions.
  • Page 5 The crossed dustbin symbol on the device means that it should not be disposed of with other household wastes at the end of its working life. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of...

  • Page 6: Revision History

    Revision History Changes to the original user manual are listed below: Revision Date Description V1.0 Jul, 2012  Release ( LC710x)

  • Page 7: Table Of Contents

    Table of Contents 1 Item Checklist ..........1 Standard Items ............1 2 System View ..........2 Front View ..............2 Rear View ..............3 Bottom View ..............4 I/O View................. 5 3 Peripheral Installation ........ 7 Cash Drawer ..............7 Serial Ports (COM 1 to COM 4) ........

  • Page 8: Item Checklist

    Item Checklist Take the system unit out of the carton. Remove the unit from the carton by holding it by the foam inserts. The following contents should be found in the carton: Standard Items a. System b. Driver CD c. Power Adapter (65W) d.

  • Page 9: System View

    System View Front View ③ ② ① Number Description FRONT PLATE CHASSIS COVER （Optional） CHASSIS...

  • Page 10: Rear View

    Rear View ④ Number Description I/O PLATE...

  • Page 11: Bottom View

    Bottom View ⑤ ⑥ Number Description Wall Mount Kit Installing Place Stand Pad...

  • Page 12: I/O View

    I/O View Rear View Number Description Cash Drawer USB x 4 COM1~4 (from left to right) Power Jack for System Power Button Power LED Kensington Lock Note: The maximum current that can be drawn from each COM port is 500 mA.
  • Page 13 Front View Number Description Model Label Power LED Power Button...

  • Page 14: Peripheral Installation

    Peripheral Installation The peripheral and modules units provided are tested and can be supplied at your request. Cash Drawer You can install a cash drawer through the cash drawer port. Please verify the pin assignment before installation. Check topic 6 “Jumper settings” to find out how to set the motherboard to work with 12 or 24V cash drawers.
  • Page 15 7 6 5 4 3 2 1 0 Reserved Cash Drawer “DOUT bit0” pin output control Cash Drawer “DOUT bit1” pin output control Reserved Cash Drawer “DIN bit0” pin input status Reserved Bit 7: Reserved Bit 6: Cash Drawer “DIN bit0” pin input status. = 1: the Cash Drawer closed or no Cash Drawer = 0: the Cash Drawer opened Bit 5: Reserved...

  • Page 16: Serial Ports (Com 1 To Com 4)

    O 48C 00 Allow to close  Set the I/O address 48Ch bit2 =1 for opening Cash Drawer by “DOUT bit0” pin control.  Set the I/O address 48Ch bit2 = 0 for allow close Cash Drawer. Command Cash Drawer I 48C Check status ...
  • Page 17 NULL, or +5/+12 VDC NULL, or +5/+12 VDC DB9: male connector RJ45-10 connector...

  • Page 18: System Assembly & Disassembly

    System Assembly & Disassembly Replace the HDD Put the system upside down. Unfasten the under cover screw (x5) Unfasten the I/O cover screw (x2). Slide out the I/O Cover. Unfasten the HDD screw (x3). Separate the HDD from the metal bracket...

  • Page 19: Replace The Motherboard

    Replace the Motherboard Put the system upside down. Unfasten the under cover screw (x5) Unfasten the I/O cover screw (x2). Slide out the I/O Cover. Unfasten the HDD screw (x1) and remove the DDR and LED cable. Unfasten the screws (x5) on the Motherboard. 5.

  • Page 20: Specification

    Specification Model LC7100 Motherboard Intel CedarView D2550 processor 1.86GHz 1MB Cache Chipset NM10 System Memory 1 x DDR3 SO-DIMM socket up to 4G, FSB 1066MHz Graphic Memory Intel GMA 3650 (Gfx frequency up to 640MHz), DX9 BIOS I/O power BIOS...
  • Page 21 Operating Humidity 20% - 85% RH non-condensing Storage Humidity 20% - 85% RH non-condensing Dimension (W x D x H) 195 x 165 x 45mm Operating System Windows XP, POS Ready 2009, XP Embedded, XP professional for Embedded, OS Support Embedded, Linux, Windows 7 (32bit), POSReady 7 *Product specification is subject to change without prior notice...

  • Page 22: Jumper Settings

    Jumper Settings C56 Motherboard Layout...
  • Page 23 Connectors & Functions Connector Function LVDS Inverter Connector System FAN Connector LVDS Connector Power LED Connector SATA LED Connector Speaker & MIC Connector SATA Power Connector COM5(Touch) Connector CN10 Printer Port Connector CN11/12 USB Port(Internal) CN13 LAN LED Connector CN14 PS2 Keyboard Connector CN15 Card Reader Connector(COM6)
  • Page 24 Auto Button Setting Touch Connector CASH DRAWER Power Setting Jumper Settings Cash Drawer Power Setting Function ▲19V Inverter Selection Function ▲CCFL COM2/COM3/COM4 Power Setting COM2, COM3 and COM4 can be set to provide power to your serial device. The voltage can be set to +5V or +12V by setting jumper JP5 and JP6 on the motherboard.
  • Page 25 Enable COM2/ COM3/COM4 power in BIOS 1. Power on the system, and press the <DEL> key when the system is booting up to enter the BIOS Setup utility. Select the Advanced tab. Select VGA/COM Power Brightness Configuration Ports and press <Enter>...
  • Page 26 COM3/COM4 Jumper Setting Function ▲5V COM3 COM4 ▲12V LCD ID Setting LVDS Output Panel# Resolution Bits Channel Interface 800X600 Single 800X600 Single 800X600 Single 1024X600 Single 1024X768 Single...
  • Page 27 1024X768 Single 1280X1024 Dual : LCD Panel 1366X768 Single 1366X768 Single 1440X900 Dual 1920X1080 Dual Jumper open Jumper short...

  • Page 28: Bios Settings

    BIOS Settings BIOS Main Menu When the BIOS Main Menu is displayed, the following items can be selected. Use the arrow keys to select items and the Enter key to accept and enter the sub-menu. Note: The BIOS setup menus shown in this section are for reference only and may not exactly match the items of your BIOS version.
  • Page 29 PnP/PCI Configurations This entry appears if your system supports Plug and Play and PCI Configuration. PC health status Displays CPU, System Temperature, Fan Speed, and System Voltages Value. Load Optimized Defaults Use this menu to load the BIOS default values, i.e., factory settings for optimal performance system operations.

  • Page 30: Vga With 12V Setting

    VGA with 12V Setting 1. Turn on power than click “Del” for BIOS SETUP 2. Select Power Configuration COM/VGA Ports 3. Select VGA Power Setting...
  • Page 31 4. Change No Power to +12V 5. Press F10 to save...

  • Page 32: Appendix

    Appendix Drivers Installation: The shipping package includes a Driver CD. You can find every individual driver and utility that enables you to install the drivers in the Driver CD. Please insert the Driver CD into the drive and double click on the “index.htm” to pick up the models.

Table of Contents