Download Print this page
Ashly MX-406 Operating Manual

Ashly MX-406 Operating Manual

Ashly operating manual stereo microphone/line mixer mx-406
Hide thumbs Also See for MX-406:

Advertisement

Quick Links

MX-406
Stereo Microphone/Line Mixer
Operating Manual
Ashly Audio Inc.
847 Holt Road, Webster, NY 14580-9103
Toll Free (800) 828-6308, Telephone (585) 872-0010, FAX (585) 872-0739
www.ashly.com
All Trademarks referred to herein, are the property of their respective owners. R-042707
All Rights Reserved

Advertisement

loading
Need help?

Need help?

Do you have a question about the MX-406 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ashly MX-406

  • Page 1 MX-406 Stereo Microphone/Line Mixer Operating Manual Ashly Audio Inc. 847 Holt Road, Webster, NY 14580-9103 Toll Free (800) 828-6308, Telephone (585) 872-0010, FAX (585) 872-0739 www.ashly.com All Trademarks referred to herein, are the property of their respective owners. R-042707 All Rights Reserved...
  • Page 2 Page - 2 Operator Manual – MX-406 Mixer Copyright© 2007 – Ashly Audio Inc.
  • Page 3 Operator Manual – MX-406 Mixer The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
  • Page 4 Introduction Introduction - 4 MX-406 Mixer – 5 Congratulations on your purchase of an Ashly MX-406 stereo mic/line mixer, a professional, studio quality solution to everday mixing needs. MX-406 features include: Connectors & Cables – 5 Physical Description - 6 Installation –...
  • Page 5 Operator Manual – MX-406 Mixer The MX-406 is a versatile rack-mountable mixer capable of supporting the following applications: Small Sound Reinforcement Meeting/Board Room or Church Location Recording or Broadcast Mixing Sub-mixing in a larger system These applications are discussed in detail on Page 8.
  • Page 6 Page - 6 Safety Instructions – 3 Introduction - 4 MX-406 Mixer – 5 The MX-406 is 2RU, and weighs 13 pounds. Connectors & Cables – 5 MX-406 Front Panel Physical Description - 6 Front Panel Rear Panel Installation – 7...
  • Page 7 TRS insert as a Direct Line Output (pre EQ) for recording, you must make a special cable with tip and ring connected at the MX-406 end and a tip-sleeve mono plug at the other end. Connecting tip and ring at the mixer insert jack is necessary for uninterrupted signal within the mixer when using direct line outputs.
  • Page 8: Location Recording Or Broadcast Mixing

    Small Sound Reinforcement System Physical Description - 6 The MX-406 can be used to mix typical sound sources that might be found in a church, Installation – 7 small club, school theater or similar environment. Four of the input channels are used for...
  • Page 9 Note: Unshielded cables, improperly wired connections, and cable with broken strands are the most common problems. Make sure you use good quality cable with connectors soldered firmly on the correct pin. When in doubt, get in touch with your Ashly dealer. Inches (Millimeters)
  • Page 10: Specification

    10 K lines Unbalanced Notes: 1. 0 dBu = 0.775 Vrms 2. Sensitivity is input signal level which will produce +4 dBu out with all levels maximum Copyright© 2007 – Ashly Audio Inc. Operator Manual – MX-406 Mixer <-127dBu <-100dBu +0.5/-1.0dB...
  • Page 11 Any implied warranties which may arise under the operation of State law shall be effective only for FIVE years from the date of purchase of the product. Ashly Audio shall be liable only to correct defects in the product itself, and not for any damage or injury which may result from or be incidental to or a consequence of such defect.
  • Page 12 Copyright© 2007 – Ashly Audio Inc.