Ashly MX–4066 Specifications

Hand-built in
5-Year Warranty
Webster, NY
MX–406
The MX-406 is a rack-mountable six-input, stereo mic/line
mixer designed to be used in fixed or portable installations.
Each input will accept either microphone or line-level
signals. If microphones are used, a -20dB pad switch is
available. The microphone input has an ultra low-noise
studio-grade mic preamp with up to 60dB of mic preamp
gain. A three-position switch allowing you to set input gain
for -20, -40 and -60dB is located on the front panel.
Each input has bass and treble shelving filters with
individual control of each filter. An Aux Send on each
input can be internally assigned pre or post level/EQ.
Level and pan controls complete each input.
Additional front panel controls include: Aux Master Out-
put, Left/Right Stereo Output, On/Off Power switch and
3.5mm stereo line in jack on the front panel offers a conve-
nient input alternative for MP3 players and smartphones.
A Mono/Phones output control allows you to adjust the
mono output and stereo headphone output. The Stereo
headphone output jack is located on the front panel. Front
panel LED indicators include channel clip, Phantom power,
AC power and an 11-step LED output level meter.
Connections on the rear panel include 1/4" TRS and XLR
jacks for each input, and an XLR transformer balanced
mono output.
Ashly Audio, Inc. | 847 Holt Road | Webster, New York 14580-9103 USA
Unless otherwise stated, specification conditions are: 150 Ohm source, Input set at "-40", all other controls set at nominal, XLR output into 600 Ohm or greater.
©2014 All features, specifications and graphical representations are subject to change without notice. Ashly Audio is a division of Jam Industries, Ltd. DS-1 1213
6-C , S
hannel
The balanced stereo output jacks are 1/4" TRS.
Channel inserts are 1/4" TRS. Left and Right Stereo
Line Inputs (return) and Stereo Line Out use RCA
jacks. A switch turns +48V Phantom Power on or off.
Designed and built in the USA, the MX-406 has an
all-steel chassis, contains high-quality components
and has a five-year warranty.
MX-406 Features:
• High-gain mic preamps (60dB)
• Convenient, 3.5mm stereo line in jack on front
panel for MP3 players and smartphones
• 2-band EQ on each input
• 6-channel inserts
• 20dB input pad switch
• +48V phantom power
• Universal power supply
• AUX send and return
• Stereo line in/out
• Input level and pan controls on each input
• Safety/Compliance: cTUVus, CE, FCC, RoHS
| US toll free: +1-800-828-6308 | tel: +1-585-872-0010
M /l
tereo iC ine
Specifications
Distortion, Hum & Noise
THD @ +4dBu Output, 20Hz–20kHz
THD @ +12dBu Output, 30Hz–10kHz
IMD (SMPTE) @ +12dBu output
Equivalent Input Hum and Noise
Residual Output Noise (all levels @ min)
Master Levels (@ nominal all chan levels @ min)
Aux Master (@ nominal all chan AUX @ min)
Master Levels & One Channel Level (@ nominal)
Maximum Voltage Gain: Master (±2dB)
Mic/Line Input to Master Output
Mic/Line Input to Mono Output (600 Ohm load)
Maximum Voltage Gain: AUX Sends (dB±2)
Mic Input to Aux Master Output (Pre-chan level)
Mic Input to Aux Master Output (Post-chan level)
Stereo Line In to Master Output
Frequency Response
20Hz–20kHz
Equalization
Bass (@ 70Hz, shelving)
Treble (@ 8kHz, shelving)
Crosstalk
Adjacent Inputs (20Hz–20kHz)
Metering
VU Meters
Peak Indicators
Weights, Dimensions & Power
Dimensions
Unit Weight
Shipping Weight
Power Requirements
| fax: +1-585-872-0739 | info@ashly.com
M
ixer
Note: 0dBu = 0.775 VRMS
<0.05%
<0.05%
<0.05%
<-128dBu
<-100dBu
<-90dBu
<-90dBu
<-68dBu
+84dB
+84dB
84dB
97dB
27dB
+0.5/-1.0dB
±12dB
±12dB
<-65dB
-21 to +6VU, 0VU = +4dBu (Stereo outputs)
Peak Clip indicator on each input
channel and L/R outputs, illuminates
3dB below clipping
19" W x 3.5" H x 9.4" D
(483mm x 89mm x 239mm)
11lbs (5kg)
14lbs (7kg)
100–240VAC, 50–60Hz, 30W
| sales@ashly.com | www.ashly.com