Operation Of Refrigerator - Bar@drinkstuff CW-35D Instruction Manual

Ⅴ
I

. OPERATION OF REFRIGERATOR

.
Clean the inside before use.
For first time use (or if the appliance has not been used for a long period of

time), you should adjust the temperature to minimum and have the cabinet
empty running for 2 hours, and then put your wine in it and adjust the
desired temperature.
When the power is connected, cooling system starts to work. The

TEMP-ADJ button is set on certain position, which means that if the
temperature in the wine cooler reaches the point set, Self-control
Temperature System stops cooling system so the temperature in the cabinet
rises gradually.
When the inside temperature rises above the set point, Cooling Self-control

Temperature starts to work again, the cellar enter into cooling cycles.
When you want to change the temperature in the cabinet, You can push

"Temp +" and" Temp –" to increase and decrease the temperature.
You can push the "°C/°F" button to switch between Celsius and Fahrenheit

or push the "Lamp" button to control the light inside.
NOTE:
After you setting the temperature, the LED display will return to show the
temperature in the cooler, but it could turn to the point that you have set
gradually.
4