Advanced Cds And Mp3 Functions; Direct Access Play; Repeat Play; Marking A Track - Panasonic SC-PM21 Operating Instructions Manual

CDs and MP3 – Play (Continued)

Advanced CDs and MP3 functions

Direct access play

This function allows you to start play from a specific track.
CD-DA
Press the numeric buttons to select and play your
desired track.
MP3
1
Press [ALBUM
2
Press [4/REW/
numeric buttons to select and play your desired
track.
For two-digit track, press [h10] once then the two digits.
For three-digit track, press [h10] twice then the three digits.
• This function does not work during any random/program mode.

Repeat play

You can repeat program play or other selected play
mode.
Press [REPEAT] before or during play.
"REPEAT ON" and "
To cancel
Press [REPEAT] again.
"REPEAT OFF" is displayed and "

Marking a track

Enable you to mark one track on the disc loaded so
that you can directly play the track later.
During play, press and hold the [MARKER] until
"STORING" blinks on the display to mark your favorite
track.
Press [MARKER] during play or stop mode to recall and
play a marked track.
• The marker memory is cleared when you open the CD tray.
• This function does not work during any random/program mode.

Program play

This function allows you to program up to 24 tracks.
CD-DA
1 Press [CD 6] and then [STOP
2
Press [PROGRAM].
3
Press the numeric buttons to select your desired
track.
Repeat this step to program other tracks.
Example:
4 Press [CD 6] to start play.
8
RQT7968
or ] to select the album.
] once and then the
4] or [ ¢
3/FF/
CD-DA
" are displayed.
" is cleared.
CD-DA
7 ].
Track number
Program number
Program indicator
MP3
1 Press [CD 6] and then [STOP
2
Press [PROGRAM].
3
Press [ALBUM
album.
4
Press [3/FF/¢] once and then numeric buttons to
select your desired track.
Example:
5
Press [ENTER] to store the program.
Repeat steps 3 to 5 to program other tracks.
MP3
6 Press [CD 6] to start play.
To
cancel program
mode
replay the program
check program
contents
MP3
add to the program
clear the last track
clear all
programmed tracks
• When you try to programme more than 24 tracks "PGM FULL"
appears.
• During program play for CD-DA, you can search backward or forward
only within the current track.
• The program memory is cleared when you open the CD tray.
INTRO function (Album scan)
This function allows you to find an album by listening
to the first track of all albums in the current disc for
10 seconds each.
1 Press [CD 6] and then [STOP
2
Press [INTRO] to start the intro function.
3 While your desired album is playing, press [CD 6].
Intro mode cancelled and the playback continues.
INTRO function is cancelled after playing the first track in the last
album.
To stop during the process, press [INTRO] or [STOP 7].
• This function does not work during any random/program mode.
7 ].
or ] to select your desired
Album number
Track number
Action
Press [PROGRAM] in the stop mode.
Press [PROGRAM] then [CD 6].
Press [4/REW/4] or [3/FF/¢] when
"PGM" is displayed in the stop mode.
To check while programming, press
[PROGRAM] twice after "PGM" appears,
then press [4/REW/4] or [3/FF/¢].
Repeat step 3 in the stop mode for CD-DA.
Repeat steps 3 to 5 in the stop mode for
MP3.
Press [DEL] in the stop mode.
Press [CLEAR] in the stop mode.
"PGM CLEAR" is displayed.
7 ].
MP3