Network Settings - Brother DCP-J562DW Airprint User Manual

Home > Before Using AirPrint

Network Settings

In order to use AirPrint, your mobile device must connect to the wireless network to which your Brother machine
is connected. AirPrint supports wireless connections that use Ad-Hoc mode, infrastructure mode, or Wi-Fi
®
Direct .
To configure your mobile device for a wireless network, refer to your mobile device's user's guide. A link to your
mobile device's user's guide on Apple's website can be found by tapping
To configure your Brother machine for a wireless network, see your Brother machine's Quick Setup Guide or
Online User's Guide on your model's Manuals page on the Brother Solutions Center (http://support.brother.com).
If your Brother machine supports a wired network, you can use a network cable to connect to the wireless access
point/router.
If your Brother machine supports Wi-Fi Direct
®
Direct network, see your Brother machine's Online User's Guide on your model's Manuals page on the Brother
Solutions Center (http://support.brother.com).
Ad-Hoc mode
Connect your mobile device to your Brother machine without a wireless access point/router.
1. Mobile device
2. Wireless network machine (your Brother machine)
If your mobile device is running iOS7.0.x, you must enable IPv6 for your Brother machine when using
AirPrint in Ad-Hoc mode.
Infrastructure mode
Connect your mobile device to your Brother machine through a wireless access point/router.
• When the Brother machine is connected to the wireless access point/router using the machine's wireless
feature:
1. Mobile device
2. Wireless access point/router
> Network Settings
®
and you want to configure your Brother machine for a Wi-Fi
1
1
in Safari.
2
2
3
4