Manual Control - Line B - Danfoss ECL Comfort C25 User Manual

Manual control -
line B
Shift to manual mode.
B
Choose the unit you want to control. The selected
unit symbol will blink.
Controlled units
when the relevant button is pushed.
This operation applies to both circuits, if available.
During manual operation, all control functions are deactivated.
The boiler pump P1 must be ON when the burner is activated.
Controlled units
1 2
ON
ON ON
6 5
ON ON
Controller mode
3 0
1
are switched OFF or ON
19
The grey
side of the
ECL Card