Insignia NS-SSTK2B Quick Setup Manual

PACKAGE CONTENTS
• Selfie stick
• Adjustable mobile phone holder
• Camera mount
• Bluetooth® remote control
• Quick Setup Guide
FEATURES
• Light-weight aluminum construction
• Bluetooth® shutter remote control
• Adjustable locking head for multi-angle shots
PAIRING YOUR BLUETOOTH DEVICE
1 Press and hold (shutter) on the remote control to enter pairing mode. The light
blinks blue and red.
2 Make sure that your phone is within 33 feet (10 meters) of the remote control.
3 Turn on your Bluetooth device (such as a phone), turn on Bluetooth, then put it in pairing
mode. For more information, see the documentation that came with your phone.
4 On your Bluetooth device, select NS-SSTK2B. The remote control pairs with your
Bluetooth device and the light turns off.
Before using your new product, please read these instructions to prevent any damage.
Adapter head
GoPro adapter
Locking screw
OR
Camera mount
OR
Mobile phone holder
Remote control
Shutter
Quick Setup Guide |
"Selfie" Stick - Expandable Mobile Phone Holder
ATTACHING YOUR DEVICE
Phone holder
1 If the camera mount is attached, remove the locking screw and detach the adapter.
2 Line up the phone holder and selfie stick screw holes, then insert and tighten the locking
screw.
3 Pull up the mobile phone holder, then insert your phone in a landscape position.
Note: The mobile phone holder adjusts to fit phones that are 1.5 – 3" in width.
GoPro adapter
1 If the phone holder is attached, remove the locking screw and detach the phone holder.
2 Line up your GoPro and selfie stick screw holes, then insert and tighten the locking screw.
Camera mount
1 If the phone holder is attached, remove the locking screw and detach the phone holder.
2 Line up the camera mount and selfie stick screw holes, then insert and tighten the locking
screw.
3 Screw your camera onto the camera mount.
USING YOUR SELFIE STICK
Extending stick
1 Put your device in picture or video mode. For example, open your camera app if you're
using a phone.
Tip: Use your phone's front-facing camera to aim.
2 Pull the adapter head to extend the selfie stick to the length that you want, then adjust the
angle by tilting the tilting the phone holder, GoPro , or camera mount.
3 Aim your camera, then press
Tip: Attach the remote control to the handle of your selfie stick for easy access.
Handle
Wrist strap
NS-SSTK2B/NS-SSTK2B-C
(shutter) on the remote control.