Magnavox 13MDTD20 User Manual page 27

T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 27
Changing the Access Code
Although the default code 0000 is supplied with the TV/DVD,
you can set your own access code.
● Before you begin, press SELECT to put the
TV/DVD in TV mode.
1
Press SETUP .
Press ▲ or ▼ to select V-CHIP SET UP .
2
Then, press ENTER.
3
Press the Number buttons to enter the old
access code. When doing this for the first time, use
0000.
ACCESS CODE
– – – –
Press ▲ or ▼ to select CHANGE CODE.
4
Then, press ENTER.
– V-CHIP SET UP –
TV RATING
MPAA RATING
B CHANGE CODE
5
Press the Number buttons to enter your
desired access code in the NEW CODE space.
Then, enter the same code in the CONFIRM
CODE space. (Four Xs will appear on the screen
instead of your code.This protects the code's identity.
Your code must have exactly four digits.)
The V-CHIP SET UP screen will reappear.
NEW CODE
CONFIRM CODE
6
Press SETUP to save your settings.
X X X X
Setting V-Chip (cont'd) 27
3,5
2,4
1,6
Helpful Hints
• If you enter the wrong code in
the CONFIRM CODE space,
repeat step 5. Enter the same
new code exactly in the
CONFIRM CODE space.
• If the power fails, the default
code will be active again (0000).
Change your access code again
as necessary.