Table of Contents
Advertisement
Service and Maintenance
After use (not activated)
Clean the outer case with fresh water, wipe dry and examine for any damage. Store in
a cool dry place.
Inadvertent antenna deployment
If the red anti-tamper seal is removed, the antenna will automatically deploy. Re-
winding the antenna and fitting a new anti-tamper seal can only be done by a Orolia
Ltd authorized service station. For safe transportation, wrap the antenna around the
body of the PLB and fix in place with adhesive tape. Do not close or fold the flip-up lid
over the top of the deployed antenna as this may damage the antenna.
NOTE: Antenna re-winding will incur a service charge.
CAUTION: Never attempt to re coil the antenna
Service
Battery packs, flip cover and lanyard are user replaceable. The main body of the PLB
has no user-serviceable parts. A list of Orolia Ltd dealers and Service Agents is
located on the Orolia Ltd web site,
Deactivation
The PLB may be completely deactivated by removing the battery pack.
Important: When the battery pack is removed the PLB is no longer fully
environmentally sealed and should not be subjected to water.
Battery Pack
The battery pack is easily user replaceable. Order code 85-763-020A
www.mcmurdomarine.com/documents
CAUTION: Never attempt to recharge the Battery
Pack
Once the battery expiry date has
been reached it must be replaced.
Only fit an original McMurdo
branded -20 °C Class 2 Battery Pack
12
Advertisement
Table of Contents
