Water Intake Fault - Miele G 4760 Operating Instructions Manual

Water intake fault

Problem
The Optical Interface is
flashing quickly.
The buzzer is sounding.
The Intake/Drain indica‐
tor light is flashing on
and off.
The Optical Interface is
flashing quickly.
The buzzer is sounding.
The Intake/Drain indica‐
tor light is flashing and
fault code or
appeared in the display.
Possible cause and solution
The water supply is turned off.
Turn on the water supply all the way.
Before fixing the fault:
Turn the dishwasher off with the
There is a problem with the water intake.
Turn on the water supply fully and start the pro‐
gram again.
has
Clean the water intake filter (see "Frequently asked
questions").
The water pressure at the intake is lower than 7.25
psi.
Contact a plumber.
Frequently Asked Questions
button.
57