Selecting The Language For Audio/Subtitle/Disc Menu; Changing And Testing The Speakers Setting; Setting The Digital Output - Magnavox MRD300 User Manual

Selecting the language for Audio/Subtitle/
Disc Menu
You can select your preferred language settings so that this
DVD system will automatically switches to the language for
you whenever you load in a disc. If the language selected is
not available on the disc, the disc's default setting language
will be used instead.
1
Press SETUP.
Press 4 to select
2
'PREFERENCES,' then press
OK.
Press 4 to select 'AUDIO',
3
'SUBTITLE' or 'DISC
MENU', then press 2.
➜ If the language
selected is not available on
the disc, the original
language designated by
each disc will be selected.
Use 34 keys to select
4
your preference and press
OK to confirm.
5
To close the menu, press
SETUP again.
Helpful Hint:
– You must stop playback before selecting this function.

Changing and testing the speakers setting

1
Press SETUP.
Press 4 to select
2
'SPEAKER SETUP, ' then
press OK.
3
Select 'CNTR DELAY',
'REAR DELAY' or 'TEST, '
then press 2.
Use 34 keys to select
4
your preference and press
OK to confirm.
5
To close the menu, press
SETUP again.
Center Delay (CNTR
DELAY)
– If the listening position
is closer to the center
speaker than the front speakers, you can set the center
delay time to improve the surround sound effect.
Rear Delay
– If the listening position is closer to the rear surround
speakers than the front speakers, you can set the rear delay
time to improve the surround sound effect.
Test Tone (TEST)
– If set to 'ON, ' the system will test the speaker settings.
The test signal is generated through the left, center, right,
and surround speakers.
P
16
REPARATIONS
SETUP MENU - - MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
PREFERENCES
- - PREFERENCES PAGE - -
EXIT SETUP
TV TYPE
AUDIO ENGLISH
SUBTITLE FRENCH
DISC MENU SPANISH
GOTO PREFERENCES PAGE
PARENTAL CHINESE
PASSWORD JAPANESE
DEFAULTS GERMAN
- - PREFERENCES PAGE - -
ITALIAN
OFF
TV TYPE MAIN PAGE
AUDIO
PREFERRED AUDIO LANGUAGE
SUBTITLE ENGLISH
DISC MENU FRENCH
PARENTAL SPANISH
PASSWORD CHINESE
DEFAULTS JAPANESE
GERMAN
MAIN PAGE ITALIAN
- - PREFERENCES PAGE - -
OFF
PREFERRED SUBTITLE LANGUAGE
TV TYPE
AUDIO
SUBTITLE
DISC MENU ENGLISH
PARENTAL CHINESE
PASSWORD FRENCH
DEFAULTS SPANISH
JAPANESE
GERMAN
MAIN PAGE
ITALIAN
PREFERRED MENU LANGUAGE
SETUP MENU - - MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
PREFERENCES
- - SPEAKER SETUP PAGE - -
EXIT SETUP
5MS
CNTR DELAY
REAR DELAY
3MS
TEST
1MS
GOTO SPEAKER SETUP PAGE
OFF
- - SPEAKER SETUP PAGE - -
CNTR DELAY
15MS
MAIN PAGE REAR DELAY
TEST
LOUD SPEAKER SETUP
9MS
3MS
OFF
- - SPEAKER SETUP PAGE - -
MAIN PAGE
CNTR DELAY
SET SURROUND DELAY
REAR DELAY
TEST OFF
ON
MAIN PAGE
TEST TONE

Setting the digital output

Digital output selection enables you to specify the type of
digital output suitable for your DVD system.
1
Press SETUP.
Press 4 to select 'AUDIO
2
SETUP,' then press OK.
3
Select 'DIGITAL OUT, '
then press 2.
Use 34 keys to select
4
your preference and press
OK to confirm.
5
To close the menu, press
SETUP again.
ALL
– If you have connected the digital output to a
multichannel decoder receiver.
PCM 96K
– If the external component is capable of processing
digital signal input with sampling rates of 96 kHz.
PCM 48K
– If the external component is incapable of processing
96 kHz digital signals input, then convert to standard signal
with sampling rates of 48 kHz.
OFF (default setting)
– To deactivate the digital output.
SETUP MENU - - MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
PREFERENCES
- - AUDIO SETUP PAGE - -
EXIT SETUP
DIGITAL OUT ALL
DUAL MONO PCM 96K
DYNAMIC
PCM 48K
OFF
GOTO AUDIO SETUP PAGE
MAIN PAGE
AUDIO OUT SETUP