Subscribe to Our Youtube Channel
Related Manuals for GS Racing Storm CL-1 Pro RTR
Summary of Contents for GS Racing Storm CL-1 Pro RTR
-
Page 4: Before You Start
5. When we refer to left and right sides, we are referring to the driver’s point of view from inside the buggy. 6. The engine mounts supplied with the Storm CL-1 Pro RTR may not fit some of the newer type racing engines. - Page 7 Step By Step from A to Z Tools. Your Storm CL-1 Pro RTR includes a set of hex wrenches and a 4 way cross wrench. You will use these tools for the various adjustments and maintenance of your Storm CL-1 Pro RTR.
- Page 8 Remove the body from the Storm CL-1 Pro RTR by removing the 2 body clips and gently pulling the body away from the buggy. Check the buggy over for loose screws and linkages.
- Page 16 Step By Step from A to Z W: Your Storm CL-1 Pro RTR is built and setup to our Factory Team Specs. The stock setup will work well on most tracks. The only major setup change you might make is tires. The stock tires will work on a variety of surfaces and tracks, but ask the locals for the best tire for your specific track.
Need help?
Do you have a question about the Storm CL-1 Pro RTR and is the answer not in the manual?
Questions and answers