Table of Contents
Advertisement
P
ROGRAMMING
T
he TUNER MODE control allows you to change
the TV's input signal to ANTENNA or CABLE,
mode. It's important for the TV to know which type
of signal to look for (Cable TV or Antenna)
1
Press the MENU button on the remote control
to show the onscreen menu.
2
Press the CURSOR UPv or DOWNwbuttons to
scroll though the onscreen menu until the word Install
is highlighted.
3
Press the CURSOR RIGHTubutton to
display the Install menu features.
4
Press the CURSOR UPv or DOWNwbuttons to
scroll through the Install features until the word
Tuner Mode is highlighted.
5
Press the CURSOR RIGHTubutton to
select Antenna or Cable.
For Analog Mode
Use the cursor Right ubutton to highlight the
Tuner Mode options, then press cursor
Up
or down
to select Cable or Antenna
v
w
6
When finished, press the EXIT/INFO button
to remove the menu from the TV's screen.
7
To switch between Digital and Analog Channels, use
the A/D button on the Remote Control.
H
ELPFUL
When CABLE is selected, channels 1-125 are available.
When ANTENNA is selected, channels 2-69 are avail-
able.
P
1 - H
ART
OW TO
H
INT
U
T
SE THE
UNER
9
Using the Installation Menu
M
C
ODE
ONTROL
Advertisement
Table of Contents
