Magnavox DLP HDTV Setup Manual

50" DLP™ HDTV
MAGNAVOX representatives are ready to help you with any questions about your new product.
Call us at 1-800-705-2000 or visit us on the web at WWW.MAGNAVOX.COM.
Hooking up the TV
Your TV is designed to accept and display a wide range of video programs and signal sources,including VCRs, DVD players, high definition (HD) TV devices,
video game consoles, and regular TV broadcasts. These are a sample of devices that can be connected to the TV's front and rear panel connectors.
Front panel
Video L
S-Video
Headphones Camera Game console
Connection Basics
Best Better
HDMI Component Video
High-definition Provides superior
Multimedia Interface picture quality by
provides an separating the green,
uncompressed, blue, and red luminance
all-digital audio/video signals. Typically used
connection. HDMI with red/white audio
provides the ultimate cables.
connection.
Hooking up cable TV/antenna
To view High Definition local broadcasts, connect
your outdoor or indoor antenna to the Antenna In
input on the rear panel. To view Analog Cable,
connect your Cable TV to the Antenna In input on
the rear panel.
Refer to the illustration for the
location of the Antenna In input.
Connecting a VCR
Follow these instructions to connect a VCR
(Video Cassette Recorder).
1. Connect the video output of the VCR to the
V connector of the AV1 input using an RCA
cable. Alternatively, you can also connect it to
the S-video connector of the AV1 input using an
S-video cable.
2. Connect the audio output (L/R) of the VCR to
the audio jacks (L/R) of the AV1 input using RCA
cables.
Quick-Use and Setup Guide
WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT
EXPOSE THIS UNIT TO RAIN OR EXCESSIVE MOISTURE.
R
Good Basic
S-Video Composite Audio/Video
Supplies a better picture Separate video (yellow)
than RF and Composite and audio (red/white)
connections. Used with cables that provide a
red/white audio cables. basic connection from
the cable box or other
devices.
Note: The color of audio
inputs may differ, e.g.
red/white or red/black.
Connecting a DVD
Use the following procedure to connect a DVD player
to the TV.
Connect the video output of the DVD player to
1.
the V connector of the AV4 input using an RCA
cable. Alternatively, you can also connect it to the
component (YPbPr) connectors.
2. Connect the audio output (L/R) of the DVD player
to the audio jacks (L/R) using RCA cables
IMPORTANT
This owner's manual is used with several different television models. Not all features (and
drawings) discussed in this manual will necessarily match those found with your television set.
This is normal and does not require that you contact your dealer or request service.
Back panel
Basic
RF
Provides a basic
VCR PVR Set-top box DVD
connection for
antenna or cable.
Provides both
audio and video.
Connecting a set-top box
Connect a set-top box (cable or satellite) to the TV
as follows:
1. Connect the video output of the
set-top box to the component
video (YPbPr) connectors of the
AV3 input using RCA cables.
Note: You can also connect the
video output to the V connector.
Antenna in
2. Connect the audio output (L/R) of
the set-top box to the audio jacks
(L/R) using RCA cables.
Antenna in
Amplifier PC Antenna in HDMI device
Connecting a camera
To connect a camera to the TV, you can use the
AV connectors located on the front connector
panel (AV7). Alternatively, you can also use the
AV connectors located on the rear
panel.
1. Connect the video output of the camera to
the S-video connector on the front panel using
an S-video cable. Alternatively, you can also
connect it to the V connector using an RCA
cable.
2. Connect the audio output (L/R) of the camera
to the audio jacks (L/R) using RCA cables.
Video L R
S-Video
S-Video Video L R