Advertisement
If LCD show
2. Factory Reset settings
If LCD shows
confirm "Reset Y/N". Press the "UP" and "DOWN" button to switch these two options.
8. Info mode
Press the "MODE" button, the LCD will show
1. If LCD show
2. If LCD show
3. If LCD show
"Normal", it means the temperature control is normal; If LCD show "Warning error!", it means abnormal
temperature control work.
DANOR Theatre & Studio systems, 9 Hanagar st.. Hod Hasharon, Israel Tel. 09-7444222 Fax.09-7466466
, press the "SETUP" button to set the time, can be set: 5s, 10s, 20s, 30s, On (Keep)
press the "SETUP" button to set the factory reset. Press the "SETUP" button to
, press the "SETUP" button to check the product mode.
, press the "SETUP" button to check the software version.
, press the "SETUP" button to check the temperature control state. If LCD show
, enter to get product information.
Advertisement
