Page 1
TOP –TOP-PARZOOM LED Zoom Par, 12*4-in-1 10W RGBW User manual Please read the manual before operation. A. SPECIFICATION 1. Voltage: AC 100V-240V, 50Hz/60Hz 2. Power consumption: 130W 3. LED: 12*4-in-1 10W RGBW 21*Tri-in-1 RGB backlight 4. Beam angle: 5°~60° 5. DMX channels: 10CH, 14CH 6.
Page 2
1. Auto running mode This mode is Auto Running mode; when press MODE / UP / DOWN, the fixture will automatically run the programs according to the preset program 2. Built-in Program mode 1) This mode is Built-in Program mode. There are 10 built-in program modes;...
Page 3
Space 0-255 Lens zoom 0-100% Gray: 4. Sound active Mode This mode is sound-active mode , press the “SETUP” button can enter into sensitivity settings, could set the sensitivity value 0-31 via “UP” or “DOWN” button. When the value is 0, the sound active is no effect. 5.
Page 4
60-66 Deep Amber 67-73 Spring Yellow 74-80 Lime Green 81-87 JAS Green 88-94 Fern Green 95-101 Moss Green 102-108 Primary Green 109-115 Green 116-122 Medium Blue Green 123-129 Light Blue 130-136 Lighter Blue Select the 137-143 Steel Blue static color 144-150 Half CT Blue 151-157...
Page 5
74-80 Lime Green 81-87 JAS Green 88-94 Fern Green 95-101 Moss Green 102-108 Primary Green 109-115 Green 116-122 Medium Blue Green 123-129 Light Blue 130-136 Lighter Blue 137-143 Steel Blue Select the 144-150 Half CT Blue backlight color 151-157 Full CT Blue 158-164 State Blue 165-171...
Page 6
If LCD show , press the “SETUP” button to set the time, can be set: 5s, 10s, 20s, 30s, On (Keep) 2. Factory Reset settings If LCD shows press the “SETUP” button to set the factory reset. Press the “SETUP” button to confirm “Reset Y/N”.