Advertisement
USE & OPERATION
1. POWER: Connect the cord to a power outlet. An indicator light will
turn on, indicating that the power source is connected. Press the
"On/Speed" button to turn the unit on. When it turns on, the cooler
will start at medium speed (number 2) and then drop to the low speed
setting (number 1) after a few seconds.
2. SPEED: To adjust the fan speed, press the "On/Speed" button
repeatedly until the desires speed appears on the display.
1 – Low Speed
2 – Medium Speed
3 – High Speed
3. OSCILLATION: To turn on the oscillation feature, press the "OSC"
button once. The indicator will appear on the display. Press the "OSC"
button again to turn off the oscillation feature.
4. TIMER: The unit comes with a 10-hour timer (max. 10 hours). To set
the timer, press the "Timer" button. Each time the "Timer" button is
pressed, 0.5 hour of operation time is added. To have the unit run
continuously, make sure the timer is off.
5. COOLING: Fill the tank with water and press the "COOL" button. The
indicator light will turn on. To stop the unit from cooling, press the
button again.
6. ADDING WATER TO THE TANK: Follow these steps to add water to the
water tank:
Pull off the water tank's cover.
Carefully pour water into the water tank. Do not exceed the
"maximum" water line on the water level indicator.
For enhanced cooling, add ice to the tank.
Press once – 0.5 hour
Press twice – 1 hour
Press 3 times – 1.5 hours
Up to 10 hours
A NAME YOU CAN COUNT ON
6
Hide quick links:
Advertisement
