Download Print this page

Installing Casters; Cleaning & Maintenance - NewAir AF-1000 Series Owner's Manual

Evaporative cooler
Hide thumbs Also See for AF-1000 Series:

Advertisement

INSTALLING CASTERS

1. Make sure the unit is not connected to a power outlet.
2. Place the unit on a soft mat on the floor. Gently turn the unit upside
down and install the casters to the corresponding slots. Install screws
tightly.
3. For best results, we recommend installing the casters with the
stoppers in the front.
CLEANING & MAINTENANCE
1. Before disassembling the unit, unplug the unit from the power outlet
and drain all if the water from the tank by removing the drain cap.
2. Use a clean, damp cloth to wipe away any dust or dirt from the unit's
exterior. Also wipe down the air louvers.
3. CLEANING THE DUST FILTER: Clean the dust filter by unscrewing
/pulling out the dust filter and washing the dust filter with running
water.
4. CLEANING THE HONEYCOMB FILTER AND TANK: Clean the
honeycomb filter and tank by following these steps:
Unscrew and pull out the dust filter.
Clean the honeycomb filter by using a vacuum or brush.
Use a damp cloth with soap to clean and remove any residue from the
water tank.
Rinse and drain the water tank.
Replace the honeycomb and dust filters back into the unit. Make sure
the filters are properly inserted before tightening the screws.
NOTE: We recommend cleaning the unit every 3 months with regular use.
However, if you have hard water with a high mineral content, we recommend
cleaning the unit once a month to prevent residue buildup.
7
A NAME YOU CAN COUNT ON

Hide quick links:

Advertisement

loading