Reconnect a Headset or Car Kit
When you have paired a headset with your phone, you should be able to reconnect it automatically
by turning on Bluetooth on your phone and then turning on the headset. However, sometimes you
will need to reconnect manually, for example if you have been using your headset with another
Bluetooth device.
1. Press
and then tap
2. Tap the ON/OFF switch beside Bluetooth to turn the option On.
3. Make sure that the headset is discoverable, and then tap the headset's name in the Bluetooth
devices section.
Disconnect or Unpair from a Bluetooth Device
Follow these instructions to disconnect or unpair your phone from a Bluetooth device.
Disconnect from a Bluetooth Device
1. Press
and then tap
2. In the Bluetooth devices section, tap the device name, and then tap OK.
Unpair from a Bluetooth Device
You can make your phone forget its pairing connection with another Bluetooth device. To connect to
the other device again, you may need to enter or confirm a passcode again.
1. Press
and then tap
2. In the Bluetooth devices section, tap
Send Information Using Bluetooth
You can use Bluetooth to transfer information between your phone and another Bluetooth-enabled
device such as a phone or notebook computer. The first time you transfer information between your
phone and another device, you need to enter or confirm a security passcode. After that, your phone
and the other device are paired, and you will not need to exchange passcodes to transfer information
in the future.
Send Information From Your Phone to Another Device
You can send the following types of information, depending on the device you are sending to:
Tools and Calendar
> Settings > Connections > Bluetooth.
> Settings > Connections > Bluetooth.
> Settings > Connections > Bluetooth.
n ext to the device, and then tap Unpair.
107