Select Your Connection Quality; Label Your Connections - Magnavox 42MF438B User Manual

8.2

Select your connection quality

This section describes how you can enhance your audio visual
experience by connecting your devices with the best possible
connectors.
HDMI - Highest quality
HDMI produces the best audio visual quality possible. Both audio
and video signals are combined in one HDMI cable, providing an
uncompressed, digital interface between your TV and HDMI devices.
You must use HDMI to experience full high definition video. Use only a
certified HDMI cable.
Tip
E
If your device only has a DVI connector, use a DVI-HDMI adaptor to
connect your device to a HDMI connector on the TV. As such a con-
nection does not support sound, you must connect a separate audio
cable from the device to the Audio L/R input connectors on the TV.
D Note
Magnavox HDMI supports High-bandwidth Digital Contents
Protection (HDCP). HDCP is a form of Digital Rights Management
that protects high defi nition content in DVD or Blu-ray discs.
Component (YPbPr) - High quality
Component (Y Pb Pr) video provides better picture quality than
S-Video or composite video connections. Though component video
supports high definition signals, picture quality is lower than HDMI and
is analog.
When connecting a component video cable, match the cable colors to
the connectors on the back of the TV. Also, connect an Audio L/R cable
to the red and white Audio L/R input connectors.
Component video
cable
- Red, Green, Blue
S-Video - Good quality
An analog connection, S-Video provides better picture quality than
composite video. When connecting your device with S-Video, plug the
S-Video cable to the S-Video connector on the side of the TV. You must
connect a separate Audio L/R cable from the device to the red and
white Audio L/R in/out connectors on the side of the TV.
S-Video cable
Composite - Basic quality
Composite video provides basic analog connectivity, usually combining
a (yellow) video cinch cable with (red and white) Audio L/R cinch cable.
Match the cable colors when connecting to the composite video and
audio L/R input connectors on the side of the TV.
Composite audio/video cable
- Yellow, red and white
8.3
When you connect devices, you can label the connections to help you
to later identify where devices are connected.
1. Press
Source Labels.
2. Press
3. Press
4. Press
Audio L/R cable
or ï to highlight a device.
- Red, White
5. Press
6. Press

Label your connections

MENU on the remote control and select Installation >
TV menu
Installation Source labels
Language AV1
Channels AV2
Preferences AV3
Source labels HDMI1
Clock HDMI2
Reset AV settings HDMI3
Software upgrade Side HDMI
Side AV
Æ to enter the list of available connections.
Î or ï to highlight a connection in the list.
Æ to enter the list of devices for the connection, and press Î
Í to confirm your choice.
MENU to exit.
Audio L/R cable
- Red, White
EN-27