Troubleshooting; Screen Symbols - Sharper Image DigitNow Manual

Troubleshooting

1.Before pressing the REC button of the product, please make sure
the input sources (DV, DVD player, VHS) is turned on and can
provide audio or video signal to the product.
2.Make sure that the A/V cables are securely connected to both
the input sources and the device.
3.If the product crashes, please use a needle to push the mini
hole at the back of the product to reset the product.
4.Please use a TF card whose transfer speed is Class 10 or above.
5.If the Video Grabber's software seizes up, the system can be
reset by inserting a pin or similar object into the small hole
found on the back of the device.
6.If the screen remains black in spite you having pressed the On/Off
Menu button for a protracted period, the battery may be dead.
Connect the charger and try again.
7.If you do not succeed in recording video material to your Video
Grabber, the cables may be incorrectly connected or be connect
too loosely.

Screen Symbols

TF
OK
M
Exit
OK Set
http://www.digitnow.us
Memory card
Film
Available button alternatives
Press the On/Off Menu button
to leave the setting mode.
Press OK to save your
selected setting. .
Battery-charge indicator
19
Video recording
mode
Play mode