Advertisement
Table of Contents
- 1 Warranty Info
- 2 Specifications
- 3 Safety Precautions
- 4 Functions
- 5 Adjusting Door Travel
- 6 Trackless Doors (Jamb)
- 7 Adjusting Door Pressure Sensitivity
- 8 Attaching the Header Bracket
- 9 Troubleshooting
- 10 How to Obtain Replacement Parts and Service
- 11 Replacement Parts List
- 12 Exploded Diagram
- Download this manual
Advertisement
Table of Contents
Need help?
Do you have a question about the Z133 Series and is the answer not in the manual?
Questions and answers
I have a model xx133. The door opens from the wall but not from the remotes or from our vehicles.
If the Moore-O-Matic Z133 Series door is not opening from the remotes or vehicles, possible causes include:
1. Dead or Weak Remote Batteries – Replace the batteries in the remote controls and try again.
2. Remote Not Programmed – Reprogram the remote to the opener according to the manufacturer’s instructions.
3. Interference or Signal Blockage – Electronic interference from nearby devices or obstructions may prevent the remote signal from reaching the opener.
4. Faulty Remote Control – Test with a different remote or use the wall-mounted control panel to check if the issue is with the remote.
5. Antenna Issues – Ensure the opener’s antenna is properly extended and undamaged for receiving signals.
6. Power Supply Problems – Verify that the opener has power and the circuit breaker is not tripped.
7. Lock Mode Engaged – Some openers have a lock mode that disables remote operation. Check and disable this if needed.
8. Malfunctioning Receiver or Logic Board – If other troubleshooting steps fail, the receiver or control board may need repair or replacement.
Testing with the wall switch can help determine if the issue is with the remote or the opener itself.
This answer is automatically generated