Maxfire Torch Owner's Manual page 25

Tank Brace
Carriage Bolt
Bolts
Wing Nut
Step 9
Unscrew the pre-attached bolts
from the tank retention bracket .
Attach tank retention bracket in
between right front and rear cart
legs using the two pre-attached
M6 x 20 mm bolts as illustrated .
Attach the tank brace by inserting
the carriage bolt through the
keyhole, slide down and then
use the wing nut to secure .
step 10
Attach the left side table assembly
to the left side of grill body . Place
table over bolts and slide toward
back of grill, then tighten bolts
securely .
step 11
Attach the right side table
assembly to the right side of grill
body . Place table over bolts and
slide toward back of grill, then
tighten bolts securely .
24