Connect Accessory Devices; Recorder (Vcr-Dvd+Rw) - Magnavox 26MF/32MF231D User Manual

Connect Accessory Devices

There is a wide range of audio and video devices that can be connected to your TV.The following
connection diagrams show you how to connect them to the TV.
AV1 YPbPr, VIDEO and L/R Audio,
AV2 YPbPr, VIDEO and L/R Audio,
AV3 VIDEO, S-VIDEO, L/R Audio and Digital Audio out (SPDIF OUT)
Side VIDEO, S-VIDEO, L/R Audio and Headphone.
HDMI
75
Don't insert any cable here. This area is for repair center use only.
ANTENNA
L
S-VIDEO
R
CABLE
3
IN
S-VIDEO
AC IN
Pr Pb Y Pr Pb Y
HDMI
VIDEO VIDEO
L R L R
AV3:
L + R + VIDEO
2
OUT
OUT
Pr Pb Y Pb Y
L
S-VIDEO
HDMI
R L R VIDEO L R VIDEO
AC IN
Pr
Pr Pb Y
L
VIDEO
L R
R

Recorder (VCR-DVD+RW)

Note: Do not place your recorder too close to the TV screen. Some
recorders may be susceptible for signals from the display. Keep recorders
a minimum distance of 20" from the screen.
Connect the RF Antenna or Cable TV cable (eventually through
an optional two-way signal splitter and/or Cable TV converter
box) to the RF IN socket of your
recorder.
Connect another RF cable
2
recorder to the TV's CABLE/ANTENNA 75
For better playback quality for stereo device only, also connect
3
the Video, Audio Left and Right (only for stereo devices) AV
cables to the VIDEO, AUDIO L and R input jacks of AV3.
If your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable to the
S-VIDEO input instead of connecting the recorder to the
VIDEO jack of AV3. S-Video does not provide audio, so audio
cables must still be connected to provide sound.
28
VIDEO
L
R
S-VIDEO
Pb Y
HDMI
VIDEO
L R
from the output OUT of your
jack.