Remote Control Function; Installing The Batteries - Magnavox 19MF339B User Manual

I
NTRODUCTION

Remote Control Function

1
2
3
4
5
6
7
8
9
10
1. y y (power) (p. 14)
Press to turn the unit on and off.
2. SOURCE (p. 16)
Press to access connected external devices like a
BD/DVD recorder.
3. FREEZE (p. 16)
Press to pause screen image.
4. s / B / K / L (p. 14)
Press to move left / right / up / down through the
items.
5. OK (p. 14)
Press to decide the command of setting when the
main menu is displayed.
6. BACK (p. 17)
Press to return to the previous menu operation.

Installing the Batteries

Install the batteries (AAA x 2) matching the polarity indicated inside battery compartment of the remote control.
Battery Precautions:
• Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g., Alkaline and Carbon-Zinc, or rechargeable batteries like ni-cad, ni-mh, etc) or
old batteries with fresh ones.
• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
• Do not try to recharge batteries; they can overheat and rupture.
8
EN
7. SAP (p. 16)
Digital mode (DTV)
• Press to select the audio language.
Analog mode (TV)
11
• Press to select the audio mode.
8. MUTE (p. 15)
Press to turn the sound on and off.
12
9. VOL + / - (p. 15)
Press to adjust the volume.
10. Number buttons (p. 15)
Press to select channels.
• (dot)
• Press to shift the subchannel from the main channel.
13
11. FORMAT (p. 18)
14
Press to select aspect ratio available for the TV screen.
12. MENU (p. 19)
15
Press to display the main menu.
13. INFO (p. 17)
Digital mode (DTV)
• Press to display the channel information, signal type
16
and TV setting.
Analog mode (TV)
• Press to display the channel number, signal type and
TV setting.
External input mode
• Press to display the external input modes, signal type
and TV setting.
14. SLEEP (p. 15)
Press to activate the sleep timer.
15. PREV CH (p. 15)
Press to return to the previous channel.
16. CH + / - (p. 15 / p. 16)
Press to select channels and the
external input modes.
When using a universal remote control
to operate this unit.
• Make sure the component code on your universal
remote control is set to our brand.
Refer to the manual accompanying your remote
control for more details.