Onkyo TX-8160 Instruction Manual page 38

Wi-Fi: Connect the unit to network via wireless LAN
router.
On: Wireless LAN connection
Off (Wired) (default setting): Wired LAN connection
Wi-Fi Setup: You can configure wireless LAN settings by
pressing the ENTER button when "Start" is displayed. For
®
details, see "Wi-Fi connection" (
SSID: The SSID of the connected access point will be
displayed.
Signal: The signal strength of the connected access
point will be displayed.
Status: The status of the connected access point will be
displayed.
MAC Address: View this unit's MAC address.
DHCP:
Enable (default setting)
Disable
IP Address: View/set the IP address.
Subnet Mask: View/set the subnet mask.
Gateway: View/set the default gateway.
DNS Server: View/set the DNS server address.
Proxy URL: Set the proxy server address.
Proxy Port: Set the proxy port number.
0 This only appears when Proxy URL has been set.
Friendly Name: Change the name for this unit to a
simple one for display on the equipment connected by
network. Press the ENTER button and input 31 or less
characters.
0 For information on how to input characters, see
"Inputting characters" (
AirPlay PW: You can enter a password so that only the
entered user can use AirPlay. Press the ENTER button
and input 31 or less characters.
0 For information on how to input characters, see
"Inputting characters" (
Network Check: You can check the network connection.
Press the ENTER button when "Start" is displayed.
∫ 7. Bluetooth
Make the Bluetooth setting.
0 If it is not displayed, wait for a moment until the
network feature starts.
Bluetooth: Select whether or not to use the Bluetooth
function.
On (default setting)
Off
0 Select "On" when making following Bluetooth settings.
Auto In Change: The input of the unit will automatically
be switched to "BLUETOOTH" when connection is made
from a Bluetooth enabled device to the unit.
On (default setting)
Off
38
14).
36).
36).
0 If the input is not switched automatically, set to "Off"
and change the input manually.
Auto Reconnect: This function automatically reconnects
to the Bluetooth enabled device connected last when you
change the input selector to "BLUETOOTH".
On (default setting)
Off
0 This may not work with some Bluetooth enabled
devices.
Pairing Info: The information of the previous pairing
stored in this unit will be initialized. Pressing the ENTER
button when "Clear" is displayed initializes the pairing
information stored in this unit.
0 This function does not initialize the pairing information
on the Bluetooth enabled device. When pairing the unit
again with the device, be sure to clear the pairing
information on the Bluetooth enabled device in
advance. For information on how to clear the pairing
information, refer to the Bluetooth enabled device's
instruction manual.
Device: Displays the name of the Bluetooth enabled
device connected to the unit.
0 The name is not displayed when "Status" is "Ready" or
"Pairing".
Status: Displays the status of the Bluetooth enabled
device connected to the unit.
Ready: Not paired
Pairing: Pairing
Connected: Successfully connected
∫ 8. Firmware Update
Make the firmware update setting.
0 If it is not displayed, wait for a moment until the
network feature starts.
Update Notice: Availability of a firmware update will be
notified via network.
Enable (default setting)
Disable
Version: The current firmware version will be displayed.
Update via NET: Press the ENTER button to select when
you want to update the firmware via network.
0 You will not be able to select this setting if you do not
have Internet access or there is nothing to update.
Update via USB: Press the ENTER button to select
when you want to update the firmware via USB.
0 You will not be able to select this setting if a USB
storage device is not connected or there is nothing to
update in the USB storage device.
∫ 9. Lock
SetupParameter: The Setup menu will be locked to
protect the settings.
Locked
Unlocked (default setting)
Various settings