Normal Noises - Siemens WT48Y780AU Instruction Manual

Normal noises

During drying, the compressor and the pump generate some noise which is entirely normal.
The compressor in the dryer may
occasionally generate a humming noise.
The volume and pitch of this may vary
depending on the selected
programmes and the progress of the
drying.
The compressor in the dryer is ventilated
from time to time, which creates a whirring
sound.
The automatic cleaning process causes
a clicking noise.
The process of pumping the condensation
into the condensate container generates
pumping noises.
10
What to do if ...
If you cannot rectify a fault yourself (e.g. by switching the dryer off/on), please contact our
after-sales service.
We will always find an appropriate solution and will avoid unnecessary visits by engineers.
Trust the expertise of the manufacturer and rest assured that the repair will be carried out
by trained service technicians using original spare parts.
The contact details of your local after-sales service can be found in the enclosed after-sales
service directory:
– GB 0344 892 8999 (Calls charged at local or mobile rate.)
– IE 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)
When contacting the after-sales service, please specify the product number (E-Nr.)
and production number (FD) of your appliance(see inside of door).
Switch the dryer off using the programme selector and unplug the mains plug from
the socket.
Please empty condensate Emptying the condensate container
container is displayed. Press any button.
Press the Start/Pause
Please empty condensate Is the filter in the condensate container dirty?
container is displayed the filter in the condensate container
and the drying cycle is
and maintenance instructions, Page 3.
interrupted.
Please clean lint filter is Clean the fluff filters
displayed.
Press the Start/Pause
Dryer does not start. Has the Start/Pause
Door closed? Ambient temperature greater than 5 °C?
Water is leaking out. Make sure the dryer is level. Push the condensate
container back in until it locks fully into place.
Page 4.
button again.
Clean
Installation
Page 4.
button again.
button been pressed?
11