Connecting To Power - HP f500 User Manual

Hide thumbs Also See for f500:

Table of Contents

2.3 Connecting to Power

Use only the supplied car adapter to power up the camcorder and charge

the built-in battery.

Connect one end of the car adapter to the USB connector of the

camcorder.

Plug the other end of the car charger to the cigarette lighter socket

of your vehicle. Once the vehicle engine is started, the camcorder

automatically powers on.

Note:

1. The orange LED lights up while the battery is charging.

2. Please take note if the environment temperature reaches 45°C or above, the car adapter still can

supply power to camcorder, but it may not charge the battery. This is characteristic of Lithium

polymer battery and is not a malfunction.

Table of Contents