Powering The Camcorder On / Off; Auto Power On/Off; Manual Power On/Off - HP f500 User Manual

Hide thumbs Also See for f500:

Table of Contents

2.4 Powering the Camcorder On / Off

Once the vehicle engine is started, the camcorder automatically powers

on. If the Automatic Record function is enabled, the recording will

automatically start right after the camcorder powers on.

See Set Automatic Recording (2.5.1).

Once the vehicle engine shuts down, the camcorder automatically saves

the recording and turns off the power within 10 seconds.

See Delay Shutdown (4.2).

Note:

Automatic power up and shut down assumes the power socket is linked to the car ignition.

To manually turn on the power, press the

POWER button.

To turn off, press and hold the POWER button

for at least 2 seconds.

To reset, press and hold the POWER button for

at least 5 seconds.

Table of Contents