Multi-Channel Television Sound 45 - Magnavox MDV540VR/17 Owner's Manual

H9660UD_1.qx4 04.4.14
Your DVD/VCR can play tapes recorded in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound
from the left and right audio channels.Your DVD/VCR also can play tapes recorded in a second audio (usu-
ally, that means your program is recorded in a second language). Of course, your DVD/VCR will play tapes
recorded in monaural (single-channel) sound as well.
Your DVD/VCR also will record on a video cassette in Hi-Fi stereo or in second audio, so when you play
that tape on the DVD/VCR, it will be in stereo or second audio.
Read the directions on this page to familiarize yourself with the stereo and second audio setups.Then fol-
low the directions on page 46 to record in stereo or second audio, or follow the directions on page 47 to
play tapes recorded in Hi-Fi stereo.
Understanding Displays
When you watch TV channels through the DVD/VCR, portions of the display shown below will appear
when you press DISPLAY twice.
STOP
SLP
To play programs in stereo, connect the DVD/VCR to a Stereo or TV as described on pages 11 and 14.You
will use the red and white DVD/VCR AUDIO OUT jacks.
4:47 PM Page 45
If SAP or STEREO appears, the program is available in second audio or stereo.
5:40 PM
Even though a program is available in second audio or stereo, you must pro-
CH 02
STEREO
gram the DVD/VCR to receive or record the program. Follow the directions on
SAP
page 46.
This display is not available during tape playback.

Multi-Channel Television Sound 45

45