Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ironton 46481
Summary of Contents for Ironton 46481
- Page 1 ULTIMATE CAR POLISHING KIT OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item# 46481...
-
Page 2: Intended Use
For technical questions please call 1-800-222-5381. INTENDED USE: The Ironton Ultimate Car Polishing Kit is used for polishing metal surfaces with included pad, It is also able to smooth wood and metal finishes, and prepare a variety of surfaces for painting or refinishing. -
Page 3: Work Area
SAVE THESE INSTRUCTIONS WORK AREA • Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause accidents. • Do not use your tool where there is a risk of causing a fire or an explosion; e.g. in the presence of flammable liquids, gasses, or dust. -
Page 4: Personal Safety
CHART FOR MINIMUM WIRE SIZE OF EXTENSION CORD: Nameplate AMPS CORD LENGTH 25’ 50’ 100’ 150’ 18 AWG 16 AWG 16 AWG 14 AWG 6-10 18 AWG 16 AWG 14 AWG 12 AWG 10-12 16 AWG 16 AWG 14 AWG 12 AWG 12-16 14 AWG... - Page 5 • Do not modify the Car Polisher in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the equipment. There are specific applications for which the Car Polisher was designed. • Always check of damaged or worn out parts before using the Car Polisher. Broken parts will affect the Car Polisher operation.
- Page 6 An auxiliary handle is included with your sander/polisher to ease tool handling and to help maintain tool control during operation. The gear housing is designed to allow mounting of the auxiliary handle on either side of the tool or on top of the tool. To install the auxiliary handle, screw the handle securely into the threaded hole on the right of left, of the gear housing as desired.
-
Page 7: Shaft Lock
OPERATION: WARNING: ALWAYS BE SURE THE TOOL IS SWITCHED OFF AND UNPLUGGED BEFORE ASSEMBLING PARTS, MAKING ADJUSTMENTS, ASSEMBLING OR REPLACING SANDING DISCS, BUFFER PADS, OR CHECKING FUNCTION ON THE TOOL. SHAFT LOCK Never depress the shaft lock when the spindle is moving. The shaft lock is located on the top, forward portion of the gear housing. -
Page 8: Sanding Operation
CAUTION: Never switch on the tool when it is contacting the work piece or possible injury to the operator or damaging the work piece may occur. Make sure the object being polished is free from burrs and other foreign matter which could damage the polishing pads. -
Page 9: Maintenance
WARNING: Use the proper size sanding disc paper only. Follow manufacturer’s recommendations when selecting sanding paper. Larger sanding paper extending beyond the sanding pad presents a laceration hazard and may cause snagging, tearing of the disc or kickback Procedures for using a lock-nut type sanding disc (with arbor hole): 1) Unplug the sander/polisher from the power source. - Page 10 Page of 12...
- Page 11 Page of 12...
- Page 12 WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • lead from lead-based paints, •...
Need help?
Do you have a question about the 46481 and is the answer not in the manual?
Questions and answers