Instructions; Charging; Placing The Headphones On Your Head; For Audio And Noise Cancelling - Bauhn auricle HE215028 Instruction Manual

Instructions

Charging

When fully charged, the Bauhn Noise Cancelling Headphones will last up to 15hrs depending on usage.
To charge, simply connect your headphones to a USB outlet on your PC or laptop using the Micro USB
cable provided.
1. Insert included Micro USB plug into Noise Cancelling Headphones. The charging port is located on
the bottom of right ear pad.
2. Connect the USB plug to a spare USB port on your PC or laptop.
3. Charge for 2 hours for a full charge.

Placing The Headphones On Your Head

When placing the headphones on your head, make note of the R (Right) and L (Left) markings on the
inside of the earcups. Adjust the ear pads to fit comfortably on your ears and ensure that the headband is
gently resting on the top of your head.

For Audio And Noise Cancelling

1. Connect the 3.5mm audio jack
Insert the 3.5mm audio cable into the bottom of the left earphone. Insert the other end of the cable into
your phone or MP3 Player.
2. Start audio playback
Start audio playback on your phone or MP3 player. Refer to your device's instruction manual for details on
audio playback.
3. Turning on/off noise cancelling
Use the ON/OFF switch on the back of the right ear pad to activate and deactivate the noise cancelling
feature. Slide the switch upwards to activate. Once activated, the LED on the bottom of the ear pad will
turn blue.

For Noise Cancelling Only

You can also use your headphones for noise cancelling only.
Use the ON/OFF switch on the back of the right ear pad to activate and deactivate the noise cancelling
feature. Slide the switch upwards to activate. Once activated, the LED on the bottom of the ear pad will
turn blue.
After Sales Support
8
1300 663 907 Model Number HE215028
customercare@winplus.com.au