Yamaha Portatone PSR-E213 Service Manual page 21

Test No. LCD display Test descriptions, judging conditions, etc.
8 028 : LCD On Make sure that all the segments are lit on the LCD.
9 029 : LCD Off Make sure that all the segments are turned off on the LCD.
10 031 : PD1 Chk Connect a footswitch (FC-4 or FC-5) to the [SUSTAIN] terminal.
Make sure that C3 is played when the footswitch pedal is pressed and C4 is played when the footswitch pedal
is released.
Make sure that "PD1 OK" is displayed on the LCD when finished.
11 037 : MIDI Chk Connect the [MIDI IN] jack and [MIDI OUT] jack with a MIDI cable and then execute the test. Make sure that
C4 is played and "MIDI OK" is displayed on the LCD.
12 041 : Rom Chk2 Checks the ROM connected to the CPU bus.
Make sure that "Rom OK" is displayed on the LCD.
It will take about 5 seconds for the check.
13 048 : TEST Exit Execute this to leave the test program and change to the play mode.
Switch test item list
Turn SW Name
1 M.VOLUME DOWN
2 M.VOLUME UP
3 LEFT
4 RIGHT
5 LISTEN & LEARN
6 TIMING
7 WAITING
8 FUNCTION
9 SONG
10 STYLE
11 VOICE
12 TENKEY 1
13 TENKEY 2
14 TENKEY 3
15 TENKEY 4
16 TENKEY 5
17 TENKEY 6
LCD Display Note Number
Volume - C2
Volume + C#2
Left D2
Right D#2
Listen E2
Timing F2
Waiting F#2
Function G2
Song G#2
Style A2
Voice A#2
Tenkey 1 B2
Tenkey 2 C3
Tenkey 3 C#3
Tenkey 4 D3
Tenkey 5 D#3
Tenkey 6 E3
Turn SW Name
18 TENKEY 7
19 TENKEY 8
20 TENKEY 9
21 TENKEY -
22 TENKEY 0
23 TENKEY +
24 DEMO
25 METRONOME
26 A-B REPEAT
27 REW
28 FF
29 TEMPO/TAP
30 PAUSE
31 START/STOP
32 PORTABLE GRAND
33 SOUND EFFECT
34 REVERB ON/OFF
PSR-E213/YPT-210
LCD Display Note Number
Tenkey 7 F3
Tenkey 8 F#3
Tenkey 9 G3
Tenkey - G#3
Tenkey 0 A3
Tenkey + A#3
Demo B3
Metro C4
AB Rep C#4
Rew D4
FF D#4
Temp/TAP E4
Pause F4
StartStp F#4
GP G4
SoundEff G#4
Reverb A4
21