Bios Sbios Setup Utility Etup Utility Etup Utility; Introduction; Bios Menu Bar - ASROCK N68-S User Manual

This Manual: http://www.manuallib.com/file/2447894
3. 3. 3. 3. 3. BIOS SETUP UTILITY BIOS SETUP UTILITY BIOS SETUP UTILITY BIOS SETUP UTILITY
BIOS SETUP UTILITY

3.1 Introduction

3.1 Introduction
3.1 Introduction 3.1 Introduction 3.1 Introduction
This section explains how to use the BIOS SETUP UTILITY to configure your system.
The SPI Memory on the motherboard stores the BIOS SETUP UTILITY. You may run the
BIOS SETUP UTILITY when you start up the computer. Please press <F2> during the
Power-On-Self-Test (POST) to enter the BIOS SETUP UTILITY, otherwise, POST will
continue with its test routines.
If you wish to enter the BIOS SETUP UTILITY after POST, restart the system by press-
ing <Ctl> + <Alt> + <Delete>, or by pressing the reset button on the system chassis.
You may also restart by turning the system off and then back on.
Because the BIOS software is constantly being updated, the follow-
ing BIOS setup screens and descriptions are for reference purpose
only, and they may not exactly match what you see on your screen.
3 . 1 . 1 3 . 1 . 1 3 . 1 . 1

3 . 1 . 1 BIOS Menu Bar

3 . 1 . 1 BIOS Menu Bar BIOS Menu Bar BIOS Menu Bar BIOS Menu Bar
The top of the screen has a menu bar with the following selections:
To set up the system time/date information
Main
To load the BIOS according to your requirements
Smart
To set up the advanced BIOS features
Advanced
To display current hardware status
H/W Monitor
To set up the default system device to locate and load the Op-
Boot
erating System
To set up the security features
Security
To exit the current screen or the BIOS SETUP UTILITY
Exit
Use < > key or < > key to choose among the selections on the menu bar,
and then press <Enter> to get into the sub screen.
2 9 2 9 2 9 2 9 2 9