1130 Antenna Assembly And Lcd Cover - Lenovo Yoga 300 Hardware Maintenance Manual

Lenovo Yoga 300 Hardware Maintenance Manual

1130 Antenna assembly and LCD cover

For access, remove these FRUs in order:
• "1010 Base cover" on page 34
• "1020 Battery pack" on page 36
• "1030 Hard disk drive" on page 37
• "1040 PCI Express Mini Card for wireless LAN and SSD card" on page 40
• "1050 Fan assembly and heat sink assembly" on page 42
• "1060 System board" on page 44
• "1070 Speakers" on page 47
• "1080 LCD unit" on page 48
• "1090 Power assembly" on page 49
• "1100 LCD front cover" on page 50
• "1110 Mic board, LCD cover, and hinges" on page 52
• "1120 LCD module" on page 54
Figure 13. Removal steps of antenna assembly and LCD cover
Peel off the adhesive tapes securing the antenna boards, release the cables
from the cable guide, and then remove the antenna assembly in the direction
shown by arrows .
1
a
a
When installing: Route the antenna cables along the cable guides and secure
the antenna boards with adhesive tapes. As you route the cables, make sure
that they are not subjected to any tension. Tension could cause the cables to
be damaged by the cable guides, or a wire to be broken.
56