1130 Antenna Assembly And Lcd Cover - Lenovo ideapad 710S-13ISK Hardware Maintenance Manual

ideapad 710S-13ISK Hardware Maintenance Manual

1130 Antenna assembly and LCD cover

For access, remove these FRUs in order:
• "1010 Base cover" on page 34
• "1020 Battery pack" on page 36
• "1030 PCI Express Mini Card for wireless LAN" on page 37
• "1040 SSD Card (On select models)" on page 39
• "1050 Fan assembly and heat sink assembly" on page 40
• "1060 System board" on page 41
• "1070 Speakers" on page 44
• "1080 Hinge cover and LCD unit" on page 45
• "1090 Power assembly, Touchpad module and Card reader board" on page 47
• "1100 LCD front bezel" on page 49
• "1110 LCD panel, LCD cable, LCD bracket and hinges" on page 51
• "1120 Integrated camera" on page 53
Figure 13. Removal steps of antenna assembly and LCD cover
Peel off the adhesive tapes securing the antenna boards, release the cables
from the cable guide, and then remove the antenna assembly in the direction
shown by arrows .
1
a
a
When installing: Route the antenna cables along the cable guides and secure
the antenna boards with adhesive tapes. As you route the cables, make sure
that they are not subjected to any tension. Tension could cause the cables to
be damaged by the cable guides, or a wire to be broken.
54