Sony HXC-100 Operating Instructions Manual page 33

Page title Item
Page No.
<OHB MATRIX> PHASE
M04 Select an axis
(angle) for which
the OHB matrix
adjustment to be
made.
HUE
Independently set
for 16 axes.
SAT
Independently set
for 16 axes.
ALL CLEAR
OHB MATRIX
MATRIX
<AUTO IRIS> AUTO IRIS
M05
WINDOW
OVERRIDE
IRIS LEVEL
APL RATIO
IRIS GAIN
IRIS CLOSE
<MIC GAIN> MIC1
M06 (U15)
Settings in ( ):
When a CCU
is connected
MIC2
(cannot be
changed)
FRONT MIC +48V
Settings
0, 23, 45, 68, 90, 113, 135,
158, 180, 203, 225, 248,
270, 293, 315, 338
–
99 to 99 0
–
99 to 99 0
Execute by ENTER.
The HUE and SAT
values for all PHASE
settings are cleared.
ON, OFF
ON, OFF
ON, OFF
1, 2, 3, 4, 5, 6
Select the auto iris
windows:
1 2 3
4 5 6
The shaded parts
indicate the area where
light detection occurs.
–
99 to 99, - -
Set the override to
temporarily change the
reference value for
brightness of the
automatic iris level in the
range of ±2 steps.
–99: Two steps to fully
closed iris
99: Two steps to fully
open iris
- - : OFF
The setting returns to
" - - " when the power is
turned off.
–
99 to 99 0
±4 steps
–
99 to 99 65
–
99 to 99 0
ON, OFF
20 dB, 30 dB, 40 dB, 50
dB, 60 dB, (20 dB), (30
dB), (40 dB), (50 dB), (60
dB)
20 dB, 30 dB, 40 dB, 50
dB, 60 dB, (20 dB), (30
dB), (40 dB), (50 dB), (60
dB)
ON, OFF
Page title Item
Page No.
<CALL/TALLY> CCU CALL
M07
CAM CALL
Invalid when
no CCU
connected
<OUTPUT CURRENT
FORMAT>
M08 (U16)
ACTIVE LINE
Not displayed
when a CCU
connected
<DOWN OUTPUT SIGNAL
CONVERTER>
SETTING
M09 (U19)
SD MATRIX
DETAIL
DTL LEVEL
H DTL FREQ
ASPECT
<TEST OUT> OUTPUT
M10 (U17)
(PWR SAVE)
VBS-OUT
CHARACTER
GAIN
CHROMA
SETUP
UC model
only
HD SYNC-OUT
V-PHASE
H-PHASE
Settings
- - -, ON, OFF
- - -, ON, OFF
Displays the current
format.
UC model:
1080 59.94i, 1080 50i,
720 59.94P, 720 50P
CE model:
1080 59.94i, 1080 50i,
720 59.94P, 720 50P
(When you change the
ACTIVE LINE setting, once
turn the camera off. The
camera will operate in the
selected mode when next
turned on.)
MAIN, VF, RET
CAM, CCU
When a CCU is
connected: Either
CAM (settings made
with the camera) or
CCU (settings taken
from the linked CCU)
can be selected.
When CCU is
selected, the values
for the items shown
below are displayed in
parenthesis and
cannot be changed
with the camera.
When a CCU is not
connected: CCU
cannot be selected.
ON, OFF, (ON), (OFF)
ON, OFF, (ON), (OFF)
– –
99 to 99 ( 20)
– –
99 to 99 ( 20)
SQ, EC, (SQ), (EC)
SD-SYNC, HD-SYNC, VF,
VBS
Displayed in POWER
SAVE mode only
ON, OFF
–
127 to 127 0
–
127 to 127 0
ON, OFF
Displayed when the
format is NTSC
–
127 to 127 0
–
127 to 127 0
33
Menus