Despite having multiple Safety Features, keep this product out of reach of children. • The Aztech Infrared Cooker is not intended for use by people with reduced physical, sensory or mental capabilities, and or lack of experience or knowledge. Constant supervision (from a person responsible for their safety) should be provided if such individuals would be using, cleaning, or operating, the appliance.
6 Cooking Functions. Easily select the preferred function, and the • Aztech IFC00 will automatically function as desired. Automatic functions include: Warm, Stir-Fry, BBQ, Boiling, Steam Boat, and Stew. temperature Control. Precisely increase or decrease the cooking •...
over / Low Voltage Protection. Automatically turns OFF the Infrared • Cooker if the voltage is higher than 270V and lower than 100V. Max temperature Indicator. After cooking, the Max Temperature • Indicator will only turn OFF once the plate’s temperature is lower than 60°C.
Page 6
MAX tEMP. Indicates that the plate’s temperature is higher than 60°C. NOTE: Do not touch the hEAtING AREA whenever the Max Temperature Indicator is ON. BoILING. Indicates that BOILING function is currently selected. StEAM BoAt. Indicates that STEAM BOAT function is currently selected.
USING THE INFRARED COOKER tIPS IN USING thE INFRARED CooKER Overall usage period should not exceed four (4) hours. After four (4) hours of • use, it is suggested to stop using the Infrared Cooker for at least 0 minutes before cooking again.
Page 8
StEP 2 PoSItIoN YoUR CooKWARE Place your cookware on top of the Heating Area. ADDITIONAL NOTES: You can use ANY kind of heat-resistant • cookware in cooking your meals. The maximum load that you can cook on • the Infrared Cooker should not exceed 20kg. Cooking more than the prescribed load may damage or crack the appliance’s plate.
to adjust the tEMPERAtURE: Upon selecting the preferred FUNCtIoN, press the tEMP DoWN and tEMP UP buttons to set the preferred temperature. Wait for 3 seconds and the set temperature would be confirmed. StEP 6 tURN It oFF Once the cooking has finished, press the oN/oFF button to turn off the appliance.
TROUBLESHOOTING ERRoR CoDE DISPLAY During use, there would be cases wherein the Aztech IFC00 would stop its operation and would be displaying a code representing the error it encountered. The following error codes it would be displaying can be seen below:...
Page 11
C. Allow it to cool down for 10 minutes before using again. Stop using the Infrared Cooker and immediately the Power Cord is bring it to the Aztech Service Center for repair or damaged maintenance. the plate is Stop using the Infrared Cooker and immediately...
Need help?
Do you have a question about the IFC300 and is the answer not in the manual?
Questions and answers