Audio Setup - Datavideo NVS-25 Quick Start Manual

H.264 Network Video Streaming Server
NVS-25
The NVS-25 also offers two bitrate modes, Variable Bitrate (VBR) and Constant Bitrate
(CBR). Set the NVS-25 to VBR to efficiently send video data across an IP network but
there is also a trade-off against video quality. CBR provides better video quality but is
less data and bandwidth efficient when sent across an IP network.

Audio Setup

Audio Source can be fed into the NVS-25 in two ways. One way is to embed audio into
digital video stream such as HDMI and SDI [DIGITAL] and another way is to feed audio
into a separate analog XLR/RCA phono inputs [Analog]. Select your audio source first
as shown in the diagram below.
Since analog audio levels of the standards in EBU and SMPTE regions are different,
thus audio standard option also needs to be taken into consideration. The audio
standard settings can be found under the Analog Audio System Menu.
23