Setting > Encoder Setup; Input Source Selection - Datavideo NVS-25 Quick Start Manual

H.264 Network Video Streaming Server
NVS-25
Setting > Encoder Setup
On any video streaming device, the encoder plays a crucial role in the entire system.
The NVS-25 provides the user with several configurable parameters as listed in the
table below. The following sub-sections will provide details of each parameter.

Input Source Selection

Video Tuning
Scale Down
H.264 Encode
GOP Structure
GOP Size
Video Bitrate (Kbps)
Video Rate Mode
Audio Stereo
Stereo Bitrate (Kbps)
Audio Source
Analog Audio System
Input Source Selection
This pull-down menu allows you to switch between physical video inputs, HDMI, CVBS
and SDI, located on the rear panel of NVS-25. The default is HDMI. Please note that
you will not be able to use Video Tuning if SDI is selected.
18
HDMI / CVBS / SDI
Brightness / Contrast / Hue / Saturation / Sharpness 0 ~
255
1280x720 / 720x576 / 720x480
Main 3.0 / Main 3.1 / High 4.0
IBBP / IPPP / IBP
6 / 9 / 12 / 15 / 18 / 21 / 24 / 27 / 30 / 33 / 36 / 39 / 42 / 45 /
48 / 51 / 54 / 57 / 60
800 / 900 / 1000 / 1500 / 2000 / 2500 / 3000 / 3500 / 4000 /
4500 / 5000 / 5500 / 6000
CBR / VBR
Stereo / Mono
64 / 96 / 112 / 128 / 160 / 192 / 224 / 256 / 320 / 384
DIG / RCA / XLR
EBU / SMPTE