uuIndicatorsu
Indicator
Name
U.S.
Starter System
Canada
Indicator
Turn Signal and
Hazard Warning
Indicators
High Beam Indicator
Lights On Indicator
Fog Light Indicator
* Not available on all models
80
On/Blinking
Comes on for a few seconds when you
●
set the power mode to ON, then goes off
when the engine starts.
Comes on if the starter system has a
●
*
problem.
Blinks when you operate the turn signal
●
lever.
Blink if you press the hazard warning
●
button.
Comes on when the high beam
●
headlights are on.
Comes on whenever the light switch is
●
on, or in AUTO
are on.
Comes on when the fog lights are on.
●
*
As a temporary measure, press and hold the
●
ENGINE START/STOP button for up to 15 seconds
while pressing the brake pedal and clutch pedal
(manual transmission only), and manually start the
engine. Have your vehicle checked by a dealer.
Does not blink or blinks rapidly - A turn signal
●
light bulb has blown. Change the bulb immediately.
If you remove the key from the ignition switch
●
*
when the exterior lights
set the power mode
the exterior lights are on, a chime sounds when the
driver's door is opened.
Explanation
2 Replacing Light Bulbs P. 400, 403
—
*
to VEHICLE OFF (LOCK) while
—
*
, or