Choose A Location; Mounting Rubber Feet (Only For Device Options With Palm Vein Sensor) - Fujitsu STYLISTIC Q775 Operating Manual

Choose a location

Choosealocation ACadapter Setup
Choose a suitable location for the device before setting it up. In doing
so, please follow these instructions:
• Never place the device or the AC adapter on a heat-sensitive surface.
The surface could be damaged as a result.
• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can result in damage caused by overheating.
• The back of the device heats up during normal operation. Prolonged contact
with skin can become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of the device may mark certain types of delicate surfaces.
• Keep other objects at least 100 mm / 4 inches away from the device
and its AC adapter to ensure adequate ventilation.
• Do not expose the device to extreme environmental conditions. Protect
the device against dust, humidity and heat.
Mounting rubber feet (only for device options
with palm vein sensor)
Prior to using the device options mentioned above for the first time Fujitsu
recommends the installation of the provided rubber feet.
► Install the rubber feet, see section
Fujitsu
"Using the palm vein sensor (device-dependent)", Page
First-time setup of your device
68.
19